Ajay Kumar Garg Engineering College (AKGEC), Ghaziabad 2018 admission, Fees, management quota:
Cal for Direct Admission in AKGEC/ Seat Booking Started for 2018 Contact@ 09035924718
AKGEC Ghaziabad Admission Procedure: Choosing the best College is one of the greatest difficulties in India. As College assumes an essential part of everybody Career, it’s turned out to be so critical to pick a school admirably. On the off chance that you have looked into everything about Ajay Kumar Garg Engineering College, Ghaziabad and need to get Admission in The AKGEC then the principal thing you need to do is to check this article painstakingly. Read nitty-gritty data on Ajay Kumar Garg Engineering College Admission to discover the appropriate response of “How to Get Admission in AKGEC Ghaziabad?”
AKGEC offers B.Tech courses in seven disciplines. At the post graduate level, the college offers M.Tech courses in six engineering disciplines and the MCA course. The courses are approved by AICTE and affiliated to Dr. A.P.J. Abdul Kalam Technical University (AKTU), Lucknow.
The college has been consistently maintaining excellent academic results and placements.
AKG Ghaziabad has excellent infrastructure & Spread over a 40 acre lush green campus.
Admission to different Engineering courses offered by The AKGEC is made by Uttar Pradesh State Engineering Entrance Examination (UPSEE) and past scholarly capability. To apply for courses offered by A.K.Garg, one has to satisfy the least Eligibility recommended by the Board. Presently let us look at the confirmation methodology through which one can take affirmation in Ajay Kumar Garg Engineering College, Ghaziabad.
How to get Admission in AKGEC Ghaziabad
Akgec Direct Admission Helpline: 08587926148
Email Id: email@example.com
Admission to various designing projects at A.K.Garg is made through UPSEE Counseling and one needs to clean the Cut-up marks endorsed by the affirmation board to get confirmation in it. Aside from these confirmation arrangements, the school additionally holds some seats held under Management Category. Understudies can likewise profit Direct Admission in Ajay Kumar Garg Engineering College, Ghaziabad under Management/NRI amounts.
UPSEE Counselling Dates 2018
|1 Registration, Document verification||After June 5, 2018 (tentatively)|
|2 Choice Filling – Phase 1||June 2018|
|3 Seat Allocation||June 2018|
|4 Choice Filling – Round 2||July 2018|
|5 Seat Allocation||July 2018|
|6 Seat Verification||July 2018|
|7 Online Registration for SC/ST/OBC-NCL||July Second Week 2018|
|8 Choice Filling||July 2018|
|9 Seat allotment July 2018|
|10 Online Registration for vacant seats August 2018|
|11 Choice Filling August 2018|
|12 Seat allotment August 2018|
AKGEC Ghaziabad Fees Structure:
|Courses||Intake||Fees Per Year|
|Computer Science & Engineering CSE||180||130350/-|
|Electronics & Communication Engineering ECE||180||130350/-|
|Mechanical Engineering ME||180||130350/-|
|Electrical & Electronics Engineering EEE||120||130350/-|
|Information Technology IT||120||130350/-|
|Civil Engineering CE||120||130350/-|
|Electronics and Instrumentation EI||60||130350/-|
|Computer Science and Engineering||24||133956/-|
|Automation & Robotics||18||133956/-|
|Electronics & Communication Engineering||18||133956/-|
|Electrical Power and Energy System||18||133956/-|
|Master Of Computer Application MCA||60||142856/-|
|Master Of Computer Application (Lateral Entry)||60||142856/-|
Akgec Direct Admission Helpline: 09035924718
Email Id: firstname.lastname@example.org
Minimum Eligibility Criteria
The minimum qualification for B.Tech I year is intermediate (10+2) in Physics, Chemistry, and Mathematics or equivalent with minimum 45% marks (40% for SC/ST).
The minimum qualification for B.Tech II year (Lateral Entry) is 3-year Engineering Diploma in any branch of Engineering (except Agriculture Engineering, Pharmacy, and Architecture) or graduation in B.Sc. with minimum 45% marks (40% for SC/ST).
The Selection Process for AKGEC Ghaziabad B.TechCourse is made through UPSEE Counselling.
Through UPSEE Counselling
Admissions to B.Tech I year or B.Tech II year (Lateral Entry) are made through Combined State Entrance Examination(UPSEE) conducted by Dr. A.P.J. Abdul Kalam Technical University(AKTU), Lucknow.
Ghaziabad MCA Admission 2018
Admission to MCA course is made through UPSEE Score and Past Academic Qualification. Now let us check the Admission Procedure for MCA course offered by the A.K.Garg Engineering College.
Minimum Eligibility Criteria
The minimum qualification for MCA I year is graduation (10+2+3) in any discipline from any recognised institution with minimum 50% marks (45% for SC/ST).
The minimum qualification for MCA-II year (Lateral Entry) is graduation(10+2+3) in BCA or B.Sc. (IT/CS) from any recognized Indian University or its equivalent recognized by AIU, with minimum 50% marks (45% for SC/ST).
The candidate must have passed Mathematics at 10+2 level or graduation level.
The Selection Process for AKGEC Ghaziabad MCA Course is made through UPSEE Counselling.
Through UPSEE Counselling
Admissions to the MCA-I year or MCA-II year (Lateral Entry) are made through Combined State Entrance Examination(UPSEE) conducted by Dr. A.P.J. Abdul Kalam Technical University(AKTU), Lucknow.
DIRECT ADMISSION HELPLINE: 09035924718
Ajay Kumar Garg Engineering College Ranking:
Akg Engineering College ranking Top & Accrediated with A+++. Akg Ghaziabad
|Name of the College||Rating||Placement||Academics|
Ajay Kumar Garg Engineering College Placements Stats:
Akg Engineering College placements 2018
Java Technology Course
Java is platform independent, secure, multi-threaded, robust and dynamic programming language. Due to its features, Java has gained popularity in a desktop application, Server-side applications, Enterprise applications as well as in embedded and mobile devices application. As a result, from Laptop to data centers, game consoles to scientific supercomputers, cell phones to the internet, Java is everywhere. Due to its tremendous popularity, there is a widespread demand for technocrats skilled in Java Technology in the industries.
Linux and Kernel programming course
The Linux open-source operating system is a freely distributable, cross-platform operating system based on Unix. This is installed on PCs, laptops, notebooks, mobile and tablet devices, video game consoles, servers, supercomputers and more. There are many variants of Linux like Android, Chrome, WebOS, Ubuntu, Red hat etc which are being used in mobile, embedded devices and desktops. Due to this, there is the good demand of Linux professional in the industry. Since Linux does not form a part of the university curriculum, this course is run on the college campus for the benefits of the college.
The course is of 60 Hrs duration and has been designed to include advanced concepts such as Kernel Programming. The course is conducted by RCPL and participants get certificates both from RCPL and Red Hat.
The course greatly enhances the knowledge spectrum of the students and their employability.
India’s First Industrial Robot Training Centre at AKGEC, Ghaziabad
AKGEC jointly with KUKA Robotics (India) has set up India’s first Industrial Robotics Training Centre for Educational Institutions at AKGEC, Ghaziabad. The centre was inaugurated on 5th May 2011 and operational since then
The Centre aims to train young engineering graduates and diploma students of all engineering disciplines up to the Industry expectations and foster research in the applied robotics field.
The primary objective of the centre is to encourage young professionals to take up this cross-disciplinary field as a career of their choice and acquaint them with latest technological developments in the field of Industrial Robotics.
- The AKGEC-KUKA Training Centre is set up to produce highly skilled technical manpower in the field of Industrial Robotics.
- The centre offers Basic, Advance and Expert level of training comprise of 80 Hrs duration respectively.
- The centre has highly skilled Faculty/Engineers duly trained and certified by KUKA Roboter GmbH, Germany to conduct these training programs at the centre.
- International Course Material Developed by Prof. Eberhard Roos, Augsburg University, Germany & KUKA Roboter, Germany.
- State of Art Training Centre at par with KUKA International Standard.